Skip to end of banner
Go to start of banner

SNMP4SDN

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Current »

Welcome to SNMP4SDN

Introduction

SNMP4SDN is a southbound plugin that can control the off-the-shelf commodity Ethernet switches for the purpose of building SDN using Ethernet switches. For Ethernet switches, forwarding table and ACL are where one can install the flow configuration on, and this is done via SNMP and CLI in the proposed plugin. In addition, extensions to the SAL configuration APIs are needed to provide additional API to support some settings, e.g. disabling STP and flooding, etc, which are required for Ethernet switches in SDN.

Proposal

Project Proposal

Architecture

(These documents needs update, latest content please refer to Developer Guide)

Architecture and Design

Release plan

Oxygen Release Plan

Nitrogen Release Plan

Carbon Release Plan

Boron Release Plan

Beryllium Release Plan

Lithium Release Plan

Helium Release Plan

Hydrogen Release Plan

Test Plan

Test Plan

Test Plan (for Boron)

Project Facts

Project Creation Date: August 15th, 2013
Lifecycle State: Incubation
Type: Protocol
Primary Contact: Yi-Ling (Christine) Hsieh <ylhsieh at itri.org.tw>
Project Lead:  Yi-Ling (Christine) Hsieh <ylhsieh at itri.org.tw>
Committers:  
Mailing List:   snmp4sdn-dev@lists.opendaylight.org
Archives: mailing list archives
Meetings: See Community Meetings 
Repository: git clone https://git.opendaylight.org/gerrit/snmp4sdn
Jenkins: jenkins silo
Gerrit Patches: code patches/reviews
Bugs:
  • No labels